Hot air technology is the way in which we can join or seal premade membranes of PVC and TPO. The hot air equipment can be manual or semi automatic. They can be used in workshops or roofs.

Heat guns are air heat blowers that suck in and expel air through a nozzle, which has a ceramic resistor that heats the air flow up to approximately 650 degrees.

One of the greatest advantages of this sort of sealing is that no duct tape or glue is required, because the sealing is performed by overlapping the same material of tarps and membranes by means of heat.

The use of this hot air technology is very handy when installing pre-made PVC and TPO membranes to coat or waterproof commercial, industrial or residential roofs.

The advantages of this waterproofing system are the durability and resistance against water and solar rays, and the heating benefits it provides.

The floor semi-automatic equipment has the advantage that the sealing process is faster and depends less on the operator’s ability to achieve a tight installation.